Panasonic KX-PRW130C Operating Instructions Manual page 30

Programming
2
MbN: "On" a MSelectN
3
MbN: Select "External" to monitor
from an outside line. a MEditN a
MAddN
4
MbN: "Manual" a MSelectN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN
a MSelectN
R "Baby monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
1
Press MMenuN on the handset being
monitored.
2
MbN: "On/Off" a MSelectN
3
MbN: "Off" a MSelectN a MOFFN
Editing an outside monitoring number
1
Press MMenuN on the handset being
monitored.
2
MbN: "On/Off" a MSelectN
3
MbN: "On" a MSelectN
4
MbN: Select the outside line. a MEditN
5
MMenuN a MbN: "Edit" a MSelectN
6
Edit the name if necessary. a MOKN
7
Edit the phone number if necessary. a
MOKN a MSelectN
Erasing an outside monitoring
number
1
Press MMenuN on the handset being
monitored.
2
MbN: "On/Off" a MSelectN
3
MbN: "On" a MSelectN
4
MbN: Select the outside line. a MEditN
5
MMenuN a MbN: "Erase" a MSelectN
6
MbN: "Yes" a MSelectN a MOFFN
30
PRW130C(en)_0311_ver110.pdf
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
1
2
3
Answering the baby monitor
n When monitoring with a handset:
n When monitoring from an outside line:
30
monitoring call.
Press MMenuN on the handset being
monitored.
MbN: "Sensitivity level" a
MSelectN
MbN: Select the desired setting. a
MSaveN a MOFFN
Press M N to answer calls.
If you want to respond from the monitoring
handset, press MMuteN.
R The monitoring handset will answer calls
automatically when the auto intercom
feature is set to "On" (page 15).
Note:
R If you receive an outside call when
communicating with the monitored
handset, you hear 2 tones. To answer
the call, press MOFFN, then press M
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press #1 using tone dialing.
You can turn off the baby monitor feature
by pressing #0.
Note:
R 2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
N.
2014/03/11 13:06:43