Download Print this page

3idee hp27-o VESA Adapter Assembly Instructions

Hide thumbs Also See for hp27-o VESA Adapter:

Download this manual

hp27-o VESA Adapter

Assembly

instructions

The VESA adapter is compatible with the following products from hp

(hp.com): OMEN 27 Gaming Monitor.

The VESA adapter allows you to conveniently mount your HP brand monitor to a

monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels (not included).

www.3idee.eu

Page 1 VESA Adapter Assembly instructions The VESA adapter is compatible with the following products from hp (hp.com): OMEN 27 Gaming Monitor. The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Page 2: Assembly Instruction
Assembly instructions Assembly instruction Step 1 Place your screen in a safe, soft place so that your screen does not get damaged. Remove the base of your monitor if it is already attached. Simply use the click mechanism on the monitor mount and pull the foot upwards.
Page 3 Assembly instructions Step 4 Now take the 3idee VESA adapter and put the mount that you just removed from your Omen monitor onto the VESA adapter. (Figure 3) Figure 3 Step 5 Now take the included 2 small screws and attach the mount to the 3idee VESA adapter.
Page 4 Assembly instructions Step 7 Once you have completed the last step, please check if all screws are tightened. (Figure 6) Figure 6 Step 8 Plug the monitor onto the adapter so that it audibly clicks into place. (Figure 7) Note: Apply some pressure if necessary ! Figure 7 Step 9 Please check again if the VESA adapter is properly snapped...
Page 5: Safety Instructions
We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...