Page 1
VESA Adapter Assembly instructions The VESA adapter is compatible with the following products from hp (hp.com): 32s. The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
Page 2
Assembly instructions Assembly instruction Step 1 Place your HP monitor securely on a soft surface. Now remove the base of your HP monitor if it is attached. Step 2 Now plug the VESA adapter onto the monitor. Here, the two pins (yellow) must connect with the adapter.
Page 3
Assembly instructions Step 5 Please make sure that all 4 screws are tightened firmly. Figure Step 6 For this step we recommend a 2nd person. Now pick up the monitor and hold it to your VESA adapter. It is best to first fasten 2 screws diagonally, so that the monitor can no longer fall down and you can fasten the remaining screws without effort.
Page 4
We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...