Power Trim/Tilt Switch; Warning Indicator - Yamaha 50H Owner's Manual

GB
EMU01125

POWER TRIM/TILT SWITCH

The power trim/tilt adjusts the motor
angle in relation to the transom. The
power trim/tilt switch is located on the
side of the bottom engine cowling. Push-
ing the switch "UP" trims the motor up,
then tilts the motor up. Pressing the
switch "DN" tilts the motor down and
trims the motor down. When the switch
button is released, the motor will stop in
its current position.
w
Use the power trim/tilt switch located on
UP
the bottom engine cowling only when
the boat is at a complete stop with the
engine off. Attempting to use the cowl-
DOWN
ing-mounted power trim/tilt switch while
the boat is moving could increase the risk
302013
of falling overboard and could distract
the operator, increasing the risk of colli-
sion with another boat or an obstacle.
NOTE:
Refer to the section "Adjusting Trim
Angle" and "Tilting Up/Down" for instruc-
tions on usage.
EMU00120
q
303016

WARNING INDICATOR

If the engine develops a condition which
is cause for warning, the indicator on the
front of the bottom cowling lights up.
The three indicators mounted on the bot-
tom cowling also indicate level of the
engine oil. Refer to the section "WARN-
ING SYSTEM" for details of this function.
q
1 Warning indicator
303012
2-14