Table of Contents
Advertisement
*4 If you subscribe to a distinctive ring service, select a tone (tone 1 to 5). If you select a melody, you
cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds
even if the caller has already hung up. You may either hear a dial tone or no one on the line when
you answer the call.
*6 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys,
including confirmation tones and error tones.
*8 If you subscribe to a Call Display service and want to view the caller's information after lifting up the
handset to answer a call, turn off this feature.
*9 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
*10 Generally, the line mode setting should not be changed. This setting automatically maintains receiver
volume at the proper level depending on the current telephone line condition. Set the line mode to
"A" if telephone line condition is not good.
TG477xC(en-en)_1214_ver021.pdf
23
Programming
23
2011/12/14
16:37:35
Hide quick links:
Advertisement
Table of Contents
