Troubleshooting; Before Returning For Repairs - Schumacher Electric SC1278 Owner's Manual

A minimal amount of care can keep your battery charger working properly for years.
• Clean the clamps each time you are finished charging. Wipe off any battery fluid that
may have come in contact with the clamps, to prevent corrosion.
• Occasionally cleaning the case of the charger with a soft cloth will keep the finish
shiny and help prevent corrosion.
• Coil the input and output cords neatly when storing the charger. This will help
prevent accidental damage to the cords and charger.
• Store the charger unplugged from the AC power outlet, in an upright position.
• Store inside, in a cool, dry place. Do not store the clamps on the handle, clipped
together, on or around metal, or clipped to the cables.

13. TROUBLESHOOTING

PROBLEM
The green LED
does not pulse
when charger is
properly connected.
The red LED is lit.

14. BEFORE RETURNING FOR REPAIRS

or call 1-800-621-5485, Monday-Friday 7:00
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE
AUTHORIZATION (RMA) number from Customer Service at Schumacher
Electric Corporation.
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical connection.
Reversed clamps.
For information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
Check for open fuse or circuit
breaker supplying AC outlet.
Check for a loose fitting plug or
extension cord.
Unplug the charger and reverse
the clamps.
am
• 10 •
SOLUTION
to 5:00 CST
pm