Schumacher Electric SpeedCharge SC-1200A Owner's Manual

Schumacher Electric SpeedCharge SC-1200A Owner's Manual

Fully automatic microprocessor controlled battery charger with battery tester and alternator tester for 12-volt batteries
Hide thumbs Also See for SpeedCharge SC-1200A:

Advertisement

OWNER'S MANUAL
Model SC-1200A
For 12-Volt Batteries
Fully Automatic
Microprocessor Controlled
Battery Charger with
Battery Tester and
Alternator Tester
CAUTION:
Read all Safety Rules and Operating Instructions,
and follow them with each use of this product.
ELECTRIC CORPORATION
Mount Prospect, IL 60056
U.S.A.
0099000364/1003

Advertisement

Table of Contents
loading

Summary of Contents for Schumacher Electric SpeedCharge SC-1200A

  • Page 1 OWNER’S MANUAL Model SC-1200A For 12-Volt Batteries Fully Automatic Microprocessor Controlled Battery Charger with Battery Tester and Alternator Tester CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. ELECTRIC CORPORATION Mount Prospect, IL 60056 U.S.A.
  • Page 2: Table Of Contents

    LIMITED WARRANTY ....................16 SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE. Model SC-1200A, Fully Automatic Battery Charger offers features to accommodate the needs for home or light commercial use. This manual will explain how to use the charger safely and effectively. Please read and follow these instructions and precau- tions carefully.
  • Page 3: Important Safety Instructions

    Review cautionary markings on these products and on engine. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for battery charger Model SC-1200A • WARNING: Handling the cord on this • To reduce risk of electrical shock,...
  • Page 4: Personal Safety Precautions

    Never place charger directly above Be sure to position the charger power battery being charged. The gases from cord to prevent it from being stepped the battery will corrode and damage the on, tripped over, or damaged. charger. Never pull out the plug by the cord Never touch the battery clamps together when unplugging the charger.
  • Page 5: Before Using Your Battery Charger

    BEFORE USING YOUR BATTERY CHARGER It is important to understand the charger’s requirements. This section explains the charger’s electrical requirements and how to prepare a battery for charging. extension cord, please make sure that PLUGGING IT IN you follow these guidelines: Your charger requires a 120V AC receptacle installed according to all local •...
  • Page 6: Operating Instructions

    OPERATING INSTRUCTIONS IMPORTANT: Follow all safety instructions and precautions when charging your battery. Wear complete eye protection and clothing protection. Charge your battery in a well-ventilated area. CHARGING BATTERY IN THE part of the chassis or engine block, VEHICLE: away from the battery (see figure above).
  • Page 7: Charging Battery Removed From The Vehicle

    5. Plug the power cord into an AC CHARGING BATTERY REMOVED outlet. The charger will be set to the FROM THE VEHICLE: Tester Mode for REGULAR battery POSITIVE NEGATIVE type. 6. Press the appropriate control buttons BATTERY CHARGER to select the desired charge rate and BATTERY battery type.
  • Page 8: Speedcharge Controls

    SPEEDCHARGE CONTROL SC-1200A CONTROL PANEL DISPLAY MODE SWITCH BATTERY TYPE SWITCH Use this switch to set the function of the Use this switch button to set the type of digital meter to one of the following battery to be charged to one of the three.
  • Page 9: Control Panel Guide

    CONTROL PANEL GUIDE...
  • Page 10: Using The Built-In Battery Tester

    USING THE BUILT-IN BATTERY TESTER OVERVIEW TESTING AFTER CHARGING The charger has a built-in battery tester After the unit has been changed from that displays either an accurate battery tester to charger (by selecting a charge voltage or an estimate of the battery’s rate), it remains a charger as long as it relative charge based on the battery has power.
  • Page 11: Using The Built-In Alternator Tester

    USING THE BUILT-IN ALTERNATOR TESTER The charger has a built-in alternator TESTER STATUS LED’s tester that displays either an accurate When the charger is operating as an alternator voltage or a percentage alternator tester, the status LED’s light estimate of the alternator’s relative under the following conditions: output compared to normal alternators.
  • Page 12: Using Your Battery Charger

    USING YOUR BATTERY CHARGER OVERVIEW indicated by blinking the CHARGING Using the battery charger is very simple. LED. If successful, normal charging will First, connect the battery and AC power resume after the battery is desulfated. following the precautions listed under The CHARGING LED will then stop “OPERATING INSTRUCTIONS”.
  • Page 13: Know Your Charger

    KNOW YOUR CHARGER Read this entire manual before using your charger. The items below are additional features of your charger. Relay: Your charger is equipped with a Overtemperature Protection: Your relay. This device turns the charge charger is equipped with an internal current on and off to the battery.
  • Page 14: Battery Percent And Charge Time

    BATTERY PERCENT AND CHARGE TIME This charger adjusts the charging time in order to charge the battery com- There are some important facts to keep pletely, efficiently and safely. The in mind when charging a battery. microprocessor automatically makes • When the display indicates 77% the necessary decisions.
  • Page 15: Troubleshooting

    TROUBLESHOOTING Performance problems often can be corrected by the user. Please completely read this chart for possible solutions to common problems. PROBLEM POSSIBLE CAUSE SOLUTION The battery is connected and The charger is in tester Press the CHARGE RATE the charger is on, but it isn't mode, not charger mode.
  • Page 16: Limited Warranty

    MAKES THIS LIMITED WARRANTY TO THE ORIGINAL PURCHASER AT RETAIL OF THIS PRODUCT. THIS LIMITED WARRANTY IS NOT TRANSFERABLE. Schumacher Electric Corporation warrants this battery charger for five years from date of purchase at retail against defective material or workmanship. If such should occur, the unit will be repaired or replaced at the option of the manufacturer.

Table of Contents