Refer to Figure Q
21. Mount the Outer Motor Base Cover (43) to the Inner Motor Base Cover (39) using three Bolts (46),
Washers (70), and Nuts (71). Make sure that the power cord from the Motor to the Switch (45)
does not come in contact with moving parts. (Figure Q)
22. The Cement Mixer assembly is complete. Go back and retighten all screws, nuts, andbolts.
Fig. Q
Bolt & Washer & Nut
Switch (45)
Motor Base Cover (43)
Page 18 of 27
Bolt & Washer & Nut