Related Manuals for Jetson Plasma X
Summary of Contents for Jetson Plasma X
- Page 1 Plasma X Lava Tech Hoverboard. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODELS: JPLSMX-BLK | JPLSMX-IRS | JPLSMX-OS-BLK | JPLSMX-OS-IRS Designed in Brooklyn | Made in China...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 5: Table Of Contents
.......................4 Plasma X Overview ........................6 Specs &... -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 For more information go to www.p65warnings.ca.gov/product MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 8: Plasma X Overview
Plasma X Overview 1. CHARGING PORT 2. POWER BUTTON 3. CHARGER * ADULTS MUST ASSIST CHILDREN IN THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT. - Page 9 FRONT VIEW REAR VIEW PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 11: Specs & Features
Specs & Features • MAX SPEED: 10 MPH • MAX RANGE: 10 MILES • BATTERY: 36V, 2.0AH LITHIUM-ION • CLIMBING ANGLE: UP TO 10° • PRODUCT WEIGHT: 12.6 LB • TIRE SIZE: 6.5” • PRODUCT DIMENSIONS: L23.5” × W7.5” × H6.8” •... -
Page 12: Charging The Battery
• ONLY USE THE INCLUDED CHARGER. • PLUG THE CHARGER INTO THE WALL OUTLET BEFORE PLUGGING INTO THE CHARGING PORT. • NEVER TURN ON THE PLASMA X WHILE IT IS CHARGING. • CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED - UP TO 5 HOURS. -
Page 13: Indicator Lights
Indicator Lights BATTERY INDICATOR LIGHTS STATUS LIGHTS BATTERY INDICATOR LIGHTS STATUS LIGHTS STATUS YOUR PLASMA X IS ALL SET. RECALIBRATE YOUR PLASMA X. MUST CHARGE HOVERBOARD FOR 5 HOURS TO REACH 100% BATTERY CHARGE. -
Page 14: Battery Levels
CONTINUOUSLY. THE HOVERBOARD WILL ALSO VOICE "LOW BATTERY; PLEASE CHARGE" TWICE AND MAKE A CONTINUOUS BEEPING SOUND. Changing the Lighting • THE DEFAULT LIGHTING MODE WILL DISPLAY WHEN THE PLASMA X IS POWERED ON. • SHORT-PRESS THE POWER BUTTON TO SWITCH BETWEEN DIFFERENT LIGHTING EFFECTS. Powering On and Off TO POWER THE HOVERBOARD ON OR OFF, LONG-PRESS THE POWER BUTTON. -
Page 15: How To Recalibrate
2. PRESS THE POWER BUTTON IN FOR 5 SECONDS. YOU WILL HEAR A SHORT MUSICAL TUNE. 3. WHEN THE TUNE IS COMPLETE, RELEASE THE POWER BUTTON AND THEN PRESS IT AGAIN TO POWER THE PLASMA X OFF. 4. TURN PLASMA X BACK ON; RECALIBRATION IS NOW COMPLETE. -
Page 16: Riding The Hoverboard
2. Make Moves Riding the Hoverboard TO RIDE STRAIGHT FORWARD, APPLY EQUAL PRESSURE TO THE FRONT OF EACH FOOT PAD. TO RIDE BACKWARDS, APPLY EQUAL PRESSURE TO THE BACK OF EACH FOOT PAD. - Page 17 TO TURN LEFT, ROTATE YOUR HIPS SLIGHTLY TO THE LEFT, WHICH WILL ADJUST THE DISTRIBUTION OF PRESSURE ON THE FOOTPADS AND MOVE THE RIGHT WHEEL AROUND FASTER THAN THE LEFT, AFFECTING A LEFT TURN.
- Page 18 TO TURN RIGHT, ROTATE YOUR HIPS SLIGHTLY TO THE RIGHT, WHICH WILL ADJUST THE DISTRIBUTION OF PRESSURE ON THE FOOTPADS AND MOVE THE LEFT WHEEL AROUND FASTER THAN THE RIGHT, AFFECTING A RIGHT TURN.
-
Page 19: Connecting To Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, inc. And any use of such marks by Jetson Electric Bike LLC. is under license. Other trademarks and trade names are those of their respective owners. -
Page 20: Helmet Safety
Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 21: Care & Maintenance
CLEANING THE PLASMA X TO CLEAN THE PLASMA X, CAREFULLY WIPE WITH A DAMP CLOTH, THEN DRY WITH A DRY CLOTH. DO NOT APPLY WATER DIRECTLY TO THE PLASMA X, AS THE ELECTRICAL AND ELECTRONIC SYSTEMS MAY GET WET, RESULTING IN A MALFUNCTION THAT COULD LEAD TO PERSONAL INJURY. - Page 22 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 24 US/CANADA: 1-888-976-9904 MEX: +001 888 976 9904 UK: +44 (0)33 0838 2551 Manufactured in Yueyang, China Imported by Jetson Electric Bikes LLC. P.O. Box 320149, 775 4th Ave #2, Brooklyn, NY 11232 www.ridejetson.com Made in China Date Code: 05/2022...