Bulb Length Programming Sequence; Bulb Length Off/On Programming Sequence - Pclix LT Owner's Manual

minutes or the seconds. Reset the dials to a number of 59 or below, now push the red FIRE
button to enter your number.
You can turn ON the Bulb Length Option by setting the dials to 51 and entering
programming mode in the usual way, or OFF by setting the dials to 50 and entering the
programming mode.
Like the other Options the Pclix LT let's you know if the Bulb Length Option is ON or
OFF during normal startup. In normal mode the GREEN LED will flash 3 times during startup,
if the Bulb Length Option is set ON then the RED LED will flash during the third flash of the
GREEN LED at startup.
During the time the shutter is open the GREEN LED will remain lit to indicate the
shutter is in the open state.

Bulb Length Programming Sequence (6):

- Turn the Pclix LT OFF
- set the LEFT dial to 6, the RIGHT dial can be any number
- while pushing the red Fire button turn ON Pclix LT to enter programming mode
- after 3 RED LED flashes release FIRE button
- the GREEN LED will flash twice asking you to enter the Bulb Length minutes
- set the Bulb Length minutes using the LEFT and RIGHT dials
- push FIRE button to enter the minutes, the GREEN LED will flash 3 times
- set the Bulb Length seconds using the LEFT and RIGHT dials
- push FIRE button to enter the Bulb Length seconds, the GREEN LED will flash 4 times
- turn OFF the Pclix LT to exit programming mode
- You've just set the Bulb Length time.
Please Note: Some camera models have built in maximum lengths that the bulb can be kept
open. As an example, Olympus cameras having the bulb feature limit the exposure length to 8
minutes. Please consult your camera manual for possible limitations regarding your camera
model.
Bulb Length OFF / ON Programming Sequence (5):
- Turn the Pclix LT OFF
- set the LEFT dial to 5 and set the RIGHT to 1 for Bulb Length ON or 0 for OFF
- while pushing the red Fire button turn ON Pclix LT to enter programming mode
- after 3 RED LED flashes release FIRE button
- the GREEN LED will flash 4 times indicating you have successfully set either ON or OFF
- turn OFF the Pclix LT to exit programming mode
17