Table of Contents
Advertisement
To order parts and supplies: 800.343.9353 >> eastwood.com
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before using
the TIG Water Cooler.
• Keep these product instructions for future reference.
CAN CAUSE INJURY OR DEATH!
• Improper use of an electric welder can cause electric shock, injury, and
death! Read all precautions described in the Manual provided with the
specific welder to reduce the possibility of electric shock.
CAUSE FIRE OR EXPLOSION!
• Electric welding produces sparks which can be discharged considerable
distances and at high velocity, igniting flammable or exploding vapors and
materials.
• Keep the Coolant Reservoir as far from the welder as possible.
DO NOT allow any water or coolant to splash or spill on or into the welder.
EYES AND BURN SKIN!
• Arc rays produce intense ultraviolet radiation which can burn exposed skin
and cause eye damage. Use a shield with the proper filter (a minimum of
#11) to protect your eyes from sparks and the rays of the arc when welding
or when observing open arc welding (see ANSI Z49.1 and Z87.1 for safety
standards).
A HEALTH HAZARD!
• Fumes and gasses released during welding are hazardous. Use enough
ventilation at the arc to keep fumes and gases from your breathing area
or use an OSHA approved respirator when welding where there is inad-
equate ventilation.
WILL BURN
• Use protective, heat resistant gloves and clothing when using Eastwood or
any other welding equipment. DO NOT touch welded work surface, Torch,
TIG Rod or Holder with exposed, unprotected skin until it cools.
SHOCK HAZARD! ELECTRIC SHOCK
FIRE HAZARD! WELDING SPARKS CAN
SHOCK HAZARD!
BURN HAZARD! ARC RAYS CAN INJURE
FUMES AND WELDING GASES CAN BE
BURN HAZARD! HOT METAL AND TOOLS
3
Advertisement
Table of Contents
