MEASURING COOLANT, LEVEL METHOD
• Using a ruler, measure up from the floor of the
Reservoir, up along the inside wall and place a
mark or scribe line at 5-3/4" [146mm]
(FIG 19). This is the Water Fill Line and will be
equal to 150 oz. (1 Gallon & 22 oz.) [4.4 liters]
(FIG 20).
• Place another line at 6-1/4" [159mm] (FIG 21).
This additional 1/2" [12.7mm] is the East-
wood TIG Torch Water Cooler Coolant Additive
amount and will be equal to an additional
15 oz. [0.44 liter] (FIG 21).
• The Reservoir is now full. This will be equal to
165 oz. (1 Gallon & 27 oz.) [4.88 liters] and the
level will be at the 2nd marked line (FIG 22).
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 19
FIG. 19
FIG. 20
FIG. 20
FIG. 21
FIG. 21
FIG. 22
FIG. 22
11