Table of Contents
Advertisement
The EASTWOOD ELITE TIG TORCH WATER COOLER has been specifically designed from the ground
up to add Water Cooled Torch functionality to Eastwood TIG Welders when combined with the #55253
Eastwood WP18F or #55254 Eastwood WP20F Water Cooled TIG Torches (not included). This ex-
clusive design drops torch temperatures over 100°F and allows for longer welds to be accomplished
without over heating the torch, or the users hand. The Stainless Steel Reservoir and Heavy Duty Pump
will provide years of trouble free service and performance. Rated for up to 250 Amps, this cooler is
compatible with Eastwood Welders: #20565,#20566,#20589 and #54500. It is also compatible with
any other TIG welder that has a M16X1.5 TIG Torch connection, and a 10-25 Dinse Stick Connection.
CONTENTS
(1) TIG Torch Water Cooler
SPECIFICATIONS
Power Requirement:
Power Cord:
Construction:
Dimensions:
Maximum Coolant Capacity: 190 oz. [5.61 liter]
Temperature Gauge:
Designed for use with #55253 Eastwood WP18F or #55254 Eastwood WP20F Water Cooled
TIG Torches (not included)
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
120VAC, 60Hz, 2.1 Amps
13' [3.95 meter] with built-in GFCI Protection
Stainless Steel Reservoir & Lid Assembly with powdercoated exterior
8.75" Dia. X 11.5" Height [222.2mm x 292mm]
0°-200°F
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
Table of Contents
