Eastwood Elite 55252 Instructions Manual
  1. Manuals
  2. Brands
  3. Eastwood Manuals
  4. Water Dispenser
  5. Elite 55252
  6. Instructions manual
Eastwood Elite 55252 Instructions Manual

Eastwood Elite 55252 Instructions Manual

Tig torch water cooler
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Item #55252
TIG TORCH WATER COOLER
INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Eastwood Elite 55252

  • Page 1 Item #55252 TIG TORCH WATER COOLER INSTRUCTIONS...

  • Page 2: Specifications

    The EASTWOOD ELITE TIG TORCH WATER COOLER has been specifically designed from the ground up to add Water Cooled Torch functionality to Eastwood TIG Welders when combined with the #55253 Eastwood WP18F or #55254 Eastwood WP20F Water Cooled TIG Torches (not included). This ex- clusive design drops torch temperatures over 100°F and allows for longer welds to be accomplished...

  • Page 3: Read Instructions

    BURN HAZARD! HOT METAL AND TOOLS WILL BURN • Use protective, heat resistant gloves and clothing when using Eastwood or any other welding equipment. DO NOT touch welded work surface, Torch, TIG Rod or Holder with exposed, unprotected skin until it cools.
  • Page 4 B Reservoir Lid Latch Assembly (3) C TIG Water Cooler Power Cord and GFI D TIG Water Cooler Lid and Fitting Assembly FIG. 1 FIG. 1 " " " " " " " " Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
  • Page 5 R Torch Coolant Inlet Hose  """" (Included with Eastwood Water Cooled TIG Torches, #55252 WP18F & #55253 WP20F) S Torch Coolant Outlet Hose (Included with Eastwood Water Cooled TIG Torches, #55252 WP18F & #55253 WP20F) To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 6 • Push the Torch Coolant Inlet Hose [R] down and completely over the TIG Water Cooler Coolant Outlet Fitting [G] of the Lid (FIG 8).  """" FIG. 7 FIG. 7 FIG. 8 FIG. 8 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
  • Page 7 SET-UP FIG. 9 FIG. 9 The Eastwood Elite TIG Torch Water Cooler can be mounted in one of three ways: - Benchtop (FIG 9) - (used as assembled). - Wall Mount (FIG 10) - NOT INCLUDED (Requires an optional Eastwood #55255 Wall Mount Bracket).
  • Page 8 FIG. 14 FIG. 14 • Install the three Screws through the top face of the optional Eastwood #55255 Wall Mount Bracket, (FIG 13). • Add the Nylon Flat Washers and place the Bracket on top of the Lid with the Screws through the holes, add the Lock Washers and Nuts and tighten (FIG 14).
  • Page 9 • With a Gas Bottle Bracket assembled to the Lid it will appear as in FIG 18. • For best performance and safety, the Reservoir must be maintained in a level position on a properly secured gas bottle (FIG 11). To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 10 The Eastwood Elite TIG Water Cooler is specifically designed to operate at peak effectiveness with a mixture of deionized water and #55263 Eastwood TIG Torch Water Cooler Coolant Additive which also eliminates bacteria growth and freezing. It can be pre-mixed with water or by fluid level measurement in the Reservoir.
  • Page 11 • The Reservoir is now full. This will be equal to 165 oz. (1 Gallon & 27 oz.) [4.88 liters] and the level will be at the 2nd marked line (FIG 22). FIG. 21 FIG. 21 FIG. 22 FIG. 22 To order parts and supplies: 800.343.9353 >> eastwood.com...
  • Page 12 GFCI and allow Coolant to cool off or replace Coolant. DO NOT allow Coolant temperature to exceed 125°F or permanent damage to the torch and pump can occur and dangerously high temperatures could cause scald- ing burns. FIG. 26 FIG. 26 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...

  • Page 13: Changing Coolant

    CHANGING COOLANT • With the unit turned off and unplugged, unlatch the Lid and pour spent Coolant into a household drain. • Refill according to the ADDING COOLANT MIXTURE section of these Instructions. To order parts and supplies: 800.343.9353 >> eastwood.com...

  • Page 14: Troubleshooting

    Hose over Fitting. Fitting Bacteria and Foul odor and Unplug and drain coolant. Refill according to the or fungus has debris in Cool- ADDING COOLANT MIXTURE section of these grown in the Instructions. coolant Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
  • Page 15 NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...

  • Page 16: Additional Items

    Eastwood Elite TIG Torch Water Cooler Wall Bracket #55256 Eastwood Elite TIG Torch Water Cooler Gas Bottle Bracket #55263 Eastwood TIG Torch Water Cooler Coolant Additive, 15 oz. [0.44 liter] Bottle #33996 Eastwood TIG Mate Filler Rod Feeder #12590 Welding Gloves Large...

Table of Contents