Biostar Z790 VALKYRIE Manual page 33

Vivid LED DJ
Vivid LED DJ can adjust your color scheme of ARMOR GEAR, RGB LED Device.
1. LED COMMANDER: Allows you to select the LED mode.
• Default : Default LED illuminations. (Blue light)
• RGB Sync : Allows you to synchronize the LED Type item settings.
2. LED Type: Select the LED lighting blocks.
• System : System LED illuminations. (Racing ARMOR)
• 12V LED : The 12V LED illumination. (12V_LED Device)
• 5V LED : The 5V LED illumination. (5V_LED Device)
• Memory Sync : The RGB Audio LED illumination. (Memory LED)
3. ON/OFF: To enable or disable VIVID LED function.
4. Auto: LEDs will Automatically change the Color Palette and LED Brightness.
» » If you select Auto mode, the Color Pallette and LED Brightness Bar will disabled.
5. LED SPARKLE: Allows to you choose sparkle of the LEDs.
• Permanent: LEDs are constantly lit.
• Shine: LEDs flash at a specific frequency.
• Breath: LEDs gradually flash on and off.
• Shine & Music: LEDs will flash according the music played on your system.
» » Please make sure your speaker or earphone is properly connected to audio jack before using
VALKYRIE AURORA Utility program.
• Meteor: LEDs slide at a specific frequency.
• Wave: LEDs are presented in a water wave rhythm.
• Starry sky: LEDs flicker at a specific rhythm.
• Lightning: LEDs flash and slide at a specific frequency.
• Rainbow: LEDs lights to dazzling colorful rhythm.
• Aurora: LEDs shows soft light and flickers lightly.
Chapter 3: UEFI BIOS & Software | 33
Z790 VALKYRIE