Headers & Connectors - Biostar Z790 VALKYRIE Manual

2.7 Headers & Connectors
ATX: ATX Power Source Connector
For better compatibility, we recommend to use a standard ATX 24-pin power supply for this
connector. Make sure to find the correct orientation before plugging the connector.
ATX_12V_2X4_1/ ATX_12V_2X4_2: ATX Power Source Connector
The connector provides +12V to the CPU power circuit. If the CPU power plug is 4-pin, Please
refer to the following methods to install:
1. When Power Supply has two 8-pin CPU power plugs: please install at ATX_12V_2X4_1 and
ATX_12V_2X4_2.
2. When Power Supply has only one 8pin CPU power plug: please install it in ATX_12V_2X4_1
or ATX_12V_2X4_2.
3. When the Power Supply has only a 4-pin CPU power plug: Please install on Pin 1-2-5-6 of
ATX_12V_2X4_1 or Pin 1-2-5-6 of ATX_12V_2X4_2.
Note
» » Before you power on the system, please make sure that both ATX, ATX_12V_2X4_1 and
ATX_12V_2X4_2 connectors have been plugged-in.
» » Insufficient power supplied to the system may result in instability or the peripherals not functioning
properly. Use of a PSU with a higher power output is recommended when configuring a system with
more power-consuming devices.
18 | Chapter 2: Hardware installation
Pin Assignment Pin Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
Pin Assignment
1 +12V
2 +12V
3 +12V
4 +12V
5 Ground
6 Ground
7 Ground
8 Ground