Cancelling Remote Start Ready Mode; Using The "Quick-Stop" Feature - Voxx Electronics PRESTIGE PE1BTWZ Owner's Manual

Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only
The system will exit remote start ready mode if any of the following occur:
Open any door
Open the hood or trunk (if connected)
Press the brake
Release the parking brake
Turn the ignition ON

Using the "Quick-stop" Feature

If you want to make a short stop and keep your vehicle running (to keep the interior
warm or cool), the quick-stop feature allows you to do this while keeping your vehicle
secure and your keys with you.
To engage Quick Stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, press and hold the
times within 2 seconds. The LED will flash 3 times to confirm quick
stop is entered.
3. Remove the keys from the ignition and exit the vehicle. Press the
button to lock the vehicle's doors if desired.
Note: Do not leave children or animals unattended in the vehicle when using the
quick-stop feature.
2018 Voxx Electronics Corporation. All rights reserved.
button
9