Table of Contents
Advertisement
Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the
parking lights will flash 1 time, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status
indicator will blink steadily, once per second.
NOTE: The system is equipped with a feature called Silent Choice. If enabled,
the system requires a second press of the
response from the vehicle.
Disarming the Security System
To disarm the system press the
time, indicating the system is disarmed and has unlocked the doors (if equipped and
connected).
NOTE: The system is equipped with a feature called Silent Choice. If enabled,
the system requires a second double press of the
disarming response from the vehicle. If your system is set up for 2 step unlock, a third
press of unlock will activate the audible response.
Two Stage Door Unlock (Optional)
If this feature is enabled on your system, pressing the
only the driver's door. Press
remaining doors.
Bypassing The Shock Sensor
The included security shock sensor has two stages of detection, Warn-Away and Full
Trigger. To arm the system and shock sensor press the
beep and the lights wil flash 1 time.
To Arm the system and bypass the Warn-Away detection stage press the
times within 5 seconds.
To Arm the Alarm the bypass both detection stages press the
5 seconds.
*Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 3 seconds.
2018 Voxx Electronics Corporation. All rights reserved.
button to activate an audible arming
button 2 times. The parking lights will flash 1
2 times again within three seconds to unlock the
button. The
button to activate an audible
button 2 times will unlock
button. The system will
button 3 times within
button 2
3
Advertisement
Table of Contents
