Advertisement
7.
Take a new cartridge of the color to be replaced out
of its package, and gently shake it from side to side
and front to back as shown below to distribute the
toner evenly.
8.
Hold the cartridge as shown below, and insert it all
the way into the developer cartridge slot until it
clicks.
9.
If you need to replace another cartridge, repeat
steps 3 to 8.
10. Close the front cover.
The photoconductor kit
The photoconductor kit consists of the following items:
❏
Photoconductor unit
❏
Waste toner collector
❏
Print head filter
Always pay attention to the following handling
precautions before replacing the photoconductor unit:
❏
When replacing the photoconductor unit, avoid
exposing it to room light any longer than necessary.
❏
Be sure not to scratch the surface of the drum. Also,
avoid touching the drum, since oil from your skin
may permanently damage its surface and affect
print quality.
4 4 4 4
Advertisement
