Advertisement
Messages
Description
There is insufficient memory to
Image Optimum
print the page at the specified
print quality. The printer
automatically lowers the print
quality so that it can continue
printing. If the quality of the
printout is not acceptable, try
simplifying the page by limiting
the number of graphics or
reducing the number and size of
fonts.
Press the Continue button or
reset the printer to clear the
message.
Turn the Image Optimum setting
off in the SelecType Config
Menu if you do not want the
printer to automatically lower
the print quality to continue
printing.
You may need to increase the
amount of printer memory to be
able to print at the desired print
quality for your document.
Messages
Description
There is no fuser unit installed, or
Install Fuser
the fuser unit is not installed
properly. Install the fuser unit if it
is not installed.
If a fuser unit is already installed,
open the printer's top cover,
remove the fuser oil roll, and
then remove the fuser unit.
Reinsert the fuser unit, making
sure it fits properly into the slot.
Reinstall the fuser oil roll and
close the top cover. The error
automatically clears itself if the
fuser unit is properly installed.
The fuser oil roll is not installed.
Install Oil
Install a fuser oil roll into the
Roll
printer.
The photoconductor unit is not
Install
installed, or is installed
Photocondctr
incorrectly. Install the
photoconductor unit if it is not
installed.
If the photoconductor unit is
already installed, try removing it
and then reinstalling it into the
printer.
There is no transfer belt unit
Insert Transfer
installed in the printer. Install a
Belt
transfer belt unit into the printer.
22
22
22
22
Advertisement
