Parameter Display (Disp); Date And Time; Season; Vmc Profile (The Profile According To The Previous Settings Is Displayed) - Fantini Cosmi CH193VMC Instructions For Use Manual

CH193VMC
CENTRALISED CONTROL FOR VMC UNITS

6 - PARAMETER DISPLAY (DISP)

Pressing the DISP key allows you to display certain parameters set according to the active operating program.

1.1 - DATE AND TIME

15:25 15-09-20
DAY 3
23.0
1
[ AUTO ]
SEL PROG
TEMP
15:25 15-09-20
3
DAY
2
ENTER

1.1 - SEASON

15:25 15-09-20
3
DAY
23.0
1
[ AUTO ]
SEL TEMP PROG
15:25 15-09-20
DAY 3
2
ENTER
1.1 - VMC PROFILE
15:25 15-09-20
3
DAY
23.0
1
[ MAN ]
SEL TEMP PROG
15:25 15-09-20
DAY 3
2
ENTER
The date and time are displayed.
OFF
DISP
The season is displayed.
DISP OFF
UP TO
(THE PROFILE ACCORDING TO THE PREVIOUS SETTINGS IS DISPLAYED)
DISP OFF
VMC = V1
UP TO
ENTER
Note:
With integration active and ventilation
in MAN will be displayed:
■ VMC = INT
With integration off and ventilation in
MAN will be displayed:
■ VMC = V1
With ventilation in AUTO in both
cases the set ventilation programme
is displayed.
20