Advertisement
Available languages
Available languages
airing and not near the fire or any high temperature objects) before
refitting into the vacuum cleaner. This should be done once every six
months or when suction appears to be significantly reduced.
Important:
All filters should be checked regularly for signs of damage, preferably
after each cleaning task. The filters must be replaced immediately if
they become damaged. Always disconnect the vacuum cleaner from
the electrical outlet before checking the filters.
Note:
The suction hole must be open, free of any obstructions at all times.
Otherwise, the motor will overheat and could become damaged.
Cleaning of main body of the unit:
Turn power control to MIN
position,
switch
off
your
vacuum cleaner, disconnect it
from the mains and let it cool
down completely.
Wipe the main body of the
unit with a slightly damp soft
cloth. Then wipe it dry by
using a dry soft cloth. Make sure that no water or moisture has
entered the openings of the device.
To protect against fire, electric shock and injury to persons do
not immerse the device or its cord or plug or any of its
accessories in water or any other liquid and do not place them
under running water in order to clean them.
Storage positions
Your vacuum cleaner may be stored in two positions: Vertical or
horizontal.
In both cases, place the floor brush
hook in its appropriate opening/slot
on the device so that the floor
brush and the telescopic tube may
be held/stored on to the device.
Opening/slot on the back side of
the device is for horizontal storage.
Opening/slot on the bottom side of
the device is for vertical storage.
20
Advertisement
