Advertisement
Available languages
Available languages
2. Change the dust bag: Pull the top part of
the bag carefully in order to remove it
without dust or dirt falling on or into the
device. Then slide in a new bag following
the guides on the two sides and the bottom
of the part in which the bag is fitted.
3. Then push down and close the front cover
firmly.
Carrying method of your cleaner
Your vacuum cleaner is equipped with a carrying
handle located on its front part to help you carry
it easily when your device is in vertical position.
Removing & Cleaning pre-motor filter and air outlet
filter
Warning:
Always disconnect your device from the mains and let it cool
down completely before removing or inserting the dust bag
and/or before cleaning the filters.
1. Open the front cover of the device.
2. Remove both filters (pre-motor filter
and air outlet filter) for cleaning or
replacement.
Please note:
The sponge filter material in the cleaner will become
dusty over time. This is normal and will not affect the
performance of the filters. If a sponge filter is so dusty
that suction does not return to 100%, then we suggest
that the filter should be removed, then
rinsed under running water and after you
slightly tap it with your hands to remove
the
excess
water,
completely for 24 hours (by natural
allow
it
to
dry
19
Advertisement
