Variable Suction Control - Primo Water ECO YL6228-S Additional Safety And Use Instructions

Use and function
Assembling of vacuum cleaner
Note: Always disconnect your appliance from the mains and let it
cool down completely before putting on
or taking off any parts.
1. Attaching the flexible hose into the
vacuum cleaner: connect the hose
connector into the swivel of the
device, push in until you hear a
"click", indicating it is safely in its
locked position.
2. Fitting the metallic telescopic
tube on to curved wand/hose
extension: push the top edge
of the metal telescopic tube
into the mouth of the curved
end of the
(mouth near the handle) and
make sure
together safely.
3. Fitting the floor brush on to the
telescopic tube: push the lower end
of the metal tube into the upper bore
of the floor brush until they are
safely connected.
telescopic tube to the desired length.
Note:
Once all attachments are in place,
unwind a sufficient length of cable and
insert the plug into the wall outlet. A
yellow mark on the power cord shows
the ideal cable length. Do not pull the
power cord beyond the red mark.
1. Make sure that the power control
button is in MIN position.
2. Insert the power plug into the wall
outlet.
flexible hose
they are connected
Adjust

Variable suction control

the
17