Advertisement
Available languages
Available languages
3. Press the power on/off button located on the unit to turn the
vacuum cleaner "on".
4. Adjust the power of the vacuum cleaner by the power control
button between positions MIN (minimum power) and MAX
(maximum power).
5. After use, unplug your vacuum
cleaner from the mains and in
order to rewind the power cable,
press the
with one hand (or with your foot
slightly) and guide the power
cord with the other hand to
ensure that either the cord or
plug
do
damage or injury.
To adjust the air flow, slide the air flow
adjustment sliding block located on the
handle of the hose either downwards or
upwards.
Dust full indication:
When the red buoy of the dust full
indicator moves into the middle of
the indicator small window, please
check if (A) the dust bag is full or
(B) something is blocking the air
flow on the device (either on the
floor brush, the hose etc.). In case
(A) please replace the dust bag with a new empty one. In case (B)
remove the object that is blocking the air flow on the device. Do not
operate the device unless you solve this problem first.
Dust bag replacement:
1. Turn power control to MIN position,
switch off your device by pressing the
power on/off switch, unplug it from the
power outlet, allow it to cool down
completely and afterwards open the
front cover of the device.
Press with your finger the locking panel
of the front cover to release it.
18
cable rewind button
not
whip
causing
Advertisement
