Table of Contents
Advertisement
Setup troubleshooting
For additional Setup troubleshooting information, see the Troubleshooting
chapter of the User's Guide.
Incorrect language
1 Press
appears on the display.
2 Press
and
3 Release the buttons.
4 Press
want appears on the display.
5 Press
Country is highlighted.
6 Press
you want appears on the display.
7 Press
is highlighted.
8 Press
9 Set the date and time. For more information, see step
5 in the Setup documentation.
Software does not
1 Turn off and then restart the computer.
install.
2 Click Cancel on all New Hardware screens.
3 Insert the CD, and then follow the instructions on the
computer screen to install the software.
If the Install screen does not appear:
1 Insert the CD.
2 Click Start
3 Type D:\Setup, where D is the letter of the CD-ROM
drive.
4 Click OK.
Power button is not lit.
1 Disconnect the power cord from the wall outlet and
then from the printer.
2 Plug the cord all the way into the power supply on the
printer.
3 Plug the cord into an electrical outlet that other
electrical devices have been using.
4 If the
to turn the printer off.
once, and then immediately press and hold
.
or
repeatedly until the language you
or
repeatedly until the option for
or
repeatedly until the country or region
or
repeatedly until Set Date and Time
.
Run.
light is not on, press
.
Advertisement
Table of Contents
