Lexmark X850E User Manual page 147

Problem
Part or all of the page is
printed in black.
The job prints, but the top and
side margins are incorrect.
Ghost images appear.
Some of the print is cut off on
the sides, top, or bottom of
the media.
Print is skewed or
inappropriately slanted.
Transparency print quality is
poor.
Troubleshooting
Action
Check the toner cartridge to see if it is installed correctly.
• Make sure the Paper Size setting in the Paper menu is correct.
• Make sure the margins are set correctly in your software application.
• Make sure the Paper Type setting in the Paper menu is correct.
• Verify the environment is Class B.
• Replace the charge rolls.
• Replace the toner cartridge.
Move the guides in the tray to the proper positions for the size loaded.
• Use only transparencies recommended by the MFP manufacturer.
• Make sure the Paper Type setting in the Paper menu is set to Transparency.
Solving print quality problems
146