Table of Contents
Advertisement
to display the video menu in the browser mode. You
can play or pause the video, select different play
mode, screen mode and preset picture settings,
etc..4. Press the related buttons on the remote control to
perform the available functions shown on the function
bar at the bottom of the TV screen.
Time shift
Allows you to record the TV programme (only for digital
signal source) so that you won't miss the favourite part
even if you go out. Before you use the function, connect
a USB device to the TV first. For the first time, you
should do the disk setup for the USB device.
1. Select Setup > Time shift.
2. P ress ◄/► to select On to switch on the time shift
function, then press EXIT to close the menu.
3. Press Option on the remote control and select Time
shift, then press OK to confirm.
4. Follow the directions on the screen to do the setup.
5. After the disk setup is done, press Option and select
Time shift.
6. P ress OK to display the time shift menu.
- Press the red button to pause the picture and begin
the time shift.
- Press the red button to play the recorded part.
- When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press the red button or OK to call out the time
shift menu.
- Press the green button to fast backward or the
yellow button to fast forward.
- Press the blue button to quit the time shift function.
Notes:
- Before you plug the USB device to TV, make sure
you have backed up the data on the device to avoid
unusual performance and data loss.
- We recommend that you use a USB device with
at least 1Gb free space and a disk speed faster
than 5.0M/sec.
- The bigger file size for time shift, the longer you can
record the programme.
- If you attempt to channel change during time shift,
a message prompts to let you select Yes or No. You
can select Yes to exit the time shift function and
execute the channel change.
PVR(Personal Video Recorder)
Allows you to record your favourite TV programme.
Before you use the function, connect a USB memory
device to the set first.
1. Press Option on the remote control and select Quick
access > PVR.
2. P ress OK/► to enter.
3. Press:
- the red button to start recording, the record file is
put into a PVR folder in Media center > Video and
named after the channel number;
- the green button to stop recording manually; if the
recording duration finishes, the recording will stop
automatically.
Advanced Functions
- ▲/▼/◄/► to adjust the recording duration.4.
In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
5. T o watch the recorded programme, exit PVR mode
fi rst and go to Media center > Video. Select the
f older PVR, then select the related record file. Press
OK to play. (It is the same if you record a digital radio
p rogramme).
Notes:
- When CI+ card is used, PVR function will be
disabled.
- Only available for digital channels.
- Only support USB memory device of FAT32 format.
- Before you plug the USB memory device to the set,
make sure you have backed up the data on the
device to avoid unusual performance and data loss.
- The bigger size of USB memory device for PVR
function, the longer you can record the programme.
- If changing channel or signal source in recording,
store the recording data and execute the channel or
signal source change.
- The set can not play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged , or
the file can not be decoded.
- Do not unplug the USB memory device when the
system is reading a file or transmitting data,
otherwise the system or the device may be
damaged.
Schedule list
This function is used to perform scheduled recording.
1. P ress Option on the remote control and select Quick
access > Schedule list.
2. P ress OK/► to display the schedule list.
3. To add a schedule into your schedule list, press the
red button first to display Schedule list. Then,
- Channel number: use◄/► to select the channel
number.
- Start date: use the digit buttons to set the recording
date.
- Start time: set the starting time of recording.
- Stop time: set the stopping time of recording.
- Schedule type:
. set Reminder to inform you that you can switch to
the scheduled programme when the time you set
comes. When the time is out and you don't execute
any operation, the dialog box will disappear and no
further operation will be executed.
. set Record to check if you really want to start your
scheduled recording when the time you set comes.
When the time is out and you don't execute any
operation, scheduled recording will start
automatically.
- Repeat type: set different repeat mode of recording.
4. P ress ▲/▼/◄/►to select Add, then press OK to add
the schedule you set into your schedule list.
5. Press the red button to repeat above procedures to
add another schedule.
6. If you wish to edit or delete a schedule, select it and
press OK to enter.
7. Press EXIT to close the menu.
17
Advertisement
Table of Contents
