Cannot Print And There Is A Firewall On The Computer - Lexmark X364DW Install Manual

V
ERIFY THAT THE PRINTER IS WORKING
•
Insert the Software and Documentation CD, and then set up the printer using a USB connection.
•
If the printer works over a USB connection, then the printer is working properly.
M
AKE SURE THE PRINTER DRIVER IS INSTALLED ON THE PRINTER
All computers that print to the wireless printer must first have the printer driver installed.
Insert the Software and Documentation CD, and then install the printer driver.

Cannot print and there is a firewall on the computer

Third-party (non-Microsoft) firewalls can interfere with wireless printing. If the printer and computer are configured
correctly, and the wireless network is working, but the printer will not print wirelessly, then a firewall could be the
problem. If there is a firewall (other than the Windows firewall) on the computer, then try one or more of the following:
•
Update the firewall using the most recent update available from the manufacturer. For instructions on how to
do this, see the documentation that came with your firewall.
•
If programs request firewall access when you install the printer or try to print, then make sure you allow those
programs to run.
•
Temporarily disable the firewall, and then install the wireless printer on the computer. Re-enable the firewall
when you have completed the wireless installation.
Network printer does not show up in the printer
selection list during installation
M
AKE SURE THE PRINTER IS ON THE SAME WIRELESS NETWORK AS THE COMPUTER
The SSID of the printer must match the SSID of the wireless network.
Find the network SSID
1
Type the IP address of your wireless access point into the address field of your browser.
a
If you do not know the IP address of the wireless access point, then do one of the following:
In Windows Vista
1
Click .
2
Click All Programs
3
Click Command Prompt.
In Windows XP and earlier
1
Click Start.
2
Click All Programs or Programs
b
Type ipconfig.
Accessories.
Accessories
Troubleshooting wireless setup
28
Command Prompt.