Part Names And Functions - Mitsubishi Electric PKFY Series Technical & Service Manual

3

PART NAMES AND FUNCTIONS

Indoor Unit
PKFY-P63VFM-A PKFY-P63VFM-A
PKFY-P100VFM-A PKFY-P100VFM-A
Air intake
Room air is suctioned
in here.
Guide vane
Air flow can be changed to horizontally
by moving the Guide vane to the left or
right.
Remote controller [PAR-20MAA]
Once the controls are set, the same operation mode can be repeated by simply pressing the on / off button.
Operation buttons
TEMP. ADJUSTMENT button
This sets the room temperature. The
temperature setting can be performed
in 1: units
Setting range
Cooler 19: to 30:
Heater 17: to 28:
TIMER button
This switches between continuous
operation and the timer operation.
OPERATION SWITCH button
Press this button to switch the cooler,
electronic dry (dehumidify), automatic
and heater modes.
LOUVER button
This switch the horizontal fan motion
ON and OFF.
(Not available for this model.)
All manuals and user guides at all-guides.com
PKFY-P63VFM-A
1
PKFY-P100VFM-A
1
Filter
(Removes dust and dirt from the intake air.)
Air outlet
TIME SETTING button
This sets the current time, start time
and stop time.
CENTRALLY CONTROLLED
ON OFF
CLOCK
CHECK
˚C
STAND BY
ERROR CODE
DEFROST
TEMP.
TIMER SET
PAR-20MAA
5
2
2
Air intake grille
Auto vane
Air outlet
AIR SPEED button
This sets the ventilation fan speed.
ON/OFF button
This switches between the operation
and stop modes each time it is pressed.
The lamp on this button lights during
operation.
1Hr.
˚C
FILTER
CHECK MODE
TEST RUN
AIR DIRECTION button
FUNCTION
NOT AVAILABLE
ON/OFF
This adjusts the vertical angle of the
ventilation.
FILTER
CHECK TEST
FILTER button
This resets the filter service indication
display
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation.