Page 1
Please scan the QR code to access the manual in multiple languages. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B...
WARNING 1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. This marking indicates that this Caution, risk of product should not be disposed electric shock. of with other household wastes. NOTICE: Please read this manual carefully before using products and keep it in the place where O&M providers can easily find.
Page 3
1. Stick Logger Installation Type 1 Type 2 Step1: Assemble logger to the inverter Step1: Assemble logger to the inverter communication interface as shown in the communication interface as shown in the diagram. diagram. Warning: Please do not hold the logger body to rotate while install or remove the logger.
Page 4
ABNORMAL STATE PROCESSING If the data on platform is abnormal when the stick logger is running, please check the table below and according to the status of indicator lights to complete a simple troubleshooting. If it still can not be resolved or indicator lights status do not show in the table below, please contact Customer Support.
Page 5
USAGE METHODS AND NOTICES FOR RESET BUTTON Usage methods and key-press descriptions for Reset button Usage: Press Key-press Status Description Light Status Short press 1s SMARTLINK rapid networking status. NET light flashes fast for 100ms. Long press 5s Rebooting the stick logger. All lights are extinguished immediately.
Page 6
3.Add a Logger Method 1: Enter logger SN manually. Method 2: Click the icon in the right and scan to enter logger SN You can find logger SN in the external packaging or on the logger body. 4.Network Configuration After the logger is added, please configure the network to ensure normal operation.
Page 7
Step 2 : Connect to AP network Click "Go to connect" and find the right "AP_XXXXX" network (XXXXX Refers to logger SN). If the password is required, you can find the password on the logger body. Go back to SOLARMAN Smart APP, after connecting to AP network.