TP-Link Tapo Smart Contact Sensor User Manual page 8

3. Test Your Sensor
a. Open and close the sensor to test it in your
preferred location.
b. Check the Event Log on the Tapo app to
confirm the open/closed status.
4. Mount Your Sensor
a. Stick the included adhesives
on the sensor and magnet.
x2
x1
Notes:
· Leave at least 0.39 inches (10 mm) of space so you can open the battery compartment.
· Installation height should not be higher than 6.56 ft (2 m).
b. Choose where you'd like to install the sensor (but don't
attach it yet). Place the magnet near the edge of the door
or window that moves.
≥ 0.39 inches (10 mm)
6