Table of Contents
Advertisement
INSTALLATION
Page 30
6.7
ELECTRICAL CONNECTIONS
Ensure compressor is installed to comply with local electricity authority stipulations and that
necessary electrical work is carried out by a competent electrical engineer. Check electrical
requirements for machine with manufacturer before commencing installation wiring. Read
"Hazardous Area Operation" section at the start of this book.
An overload device must always be fitted to motors.
Manufacturers terminal box wiring instructions must be observed.
An hours run meter fitted to the motor starter/control panel is recommended for efficient
maintenance scheduling.
6.8
RECOMMENDED ANCILLARIES SUMMARY
1.
Flexible pipe at final delivery.
2.
Overload trips.
3.
Water inlet and outlet thermometers.
4.
Water flow control.
5.
Separators and drain traps.
6.
Non-return valves.
98407.1039 iss8
Advertisement
Chapters
Table of Contents
