Download Print this page

Remote Handset - Audiolab 9000A User Manual

Advertisement

5: Remote Handset

1
RANDOM
2
3
MODE
LIST
MENU
4
SOURCE TIME DISPLAY BACK
DEVICE
CD
A
N
1. MUTE
Press to mute or unmute the 9000A
2.
Navigate back through Menu options, reduce
5
brightness, power-on volume, input sensitivity or
scroll up menu list options
3. MODE
Press to select Pre / Integrated / Pre-Power mode
4. SOURCE
Press to select the input source
5. STANDBY
Press to put the unit in, or bring it out of standby
6. VOL+
Increase Volume / Menu settings previous option
7.
Navigate forward through Menu options, increase
brightness, power-on volume, input sensitivity or
6
scroll down menu list options
8.
Confirm and apply changes in Menu options, or
7
enter a menu sub-directory
8
9. VOL-
Decrease Volume / Menu settings next option
9
10. MENU
Press to access the setup Menu
Press to go back up one level in the Menu, or exit
11. BACK
10
to the home screen
11
Press to toggle the display options
12. DISPLAY
12
Press to select the device - CD / A / N
13. CD/A/N
13
System Operations
Fit the Batteries
Open the cover and insert 2 x AAA batteries (not
supplied), replace the cover.
Always use AAA batteries and replace them in sets –
never mix up old and new batteries. Very weak
batteries can leak and damage the handset. Replace
them in good time!
Note:
there is a risk of fire and injury if a batteriy is
handled improperly. Do not disassemble, crush,
puncture, short the contacts or dispose of the
batteries in fire or water. Do not attempt to open or
service a battery. Discard used batteries in full
accordance with recycling regulations in force in your
area.
Handset Operation
Point the handset at the remote receiver and press
the buttons as illustrated to activate the relevant
functions.
The handset should be within 15 meters of the player
and there should be a clear line of sight between the
handset and unit for optimum remote control
operation.
Note:
The handset can also operate other units in the
audiolab 9000 series. The buttons shown crossed out
are for use with other Audiolab units.
Page 7

Hide quick links:

Advertisement

loading