Qutek MagiCure QMN20 Manual page 11

Table of Contents

Advertisement

The contact between
The feeling of
massager electrodes
sharp pain
Skin's sensitivity to the
Use after staying up
The contact between
Weak stimulation
massager electrodes
Dirty or oily electrodes
Red spots on the
skin after use
and the neck
Massage duration
High intensity
electrodes
Cold weather and
dry skin
late
and the neck
Low battery
Strong tingling
sensation on the
treated skin
Rub a wet towel on the neck before
bringing the electrodes in contact with
the skin. Adjust the intensity accordingly.
Appropriate massage time is 15-20
minutes
Lower the pressure if the intensity is
too high.
Check for skin allergies and shorten
the massage time. in case of a serious
allergy, stop the treatment immediately
and get desensitization treatment.
Rub the skin and electrodes' surface
with a wet towel.
Don't use it until the next day due to
electrolyte drop.
Ensure proper contact between
the electrodes and the neck before
adjusting the intensity and massage
mode.
Make sure the surface of the electrodes
is clean.
If the battery is low, connect to an
external power supply.
Stop use immediately. The spots will
disappear in 3-5 days.

Advertisement

Table of Contents
loading

Table of Contents