Summary of Contents for Qutek MagiCure QMN20
- Page 1 MagiCure Neck Massager MagiCure Neck Massager, Model QMN201, White Designed by Qutek London, Assembled in China Qutek Technology Limited, 71-75 Shelton Street, Covent Garden, London, United Kingdom Manual...
-
Page 2: Product Introduction
Product Introduction The QMN201 MagiCure Neck Massager features a streamlined, ring- shaped design that matches the human cervical vertebra curve. It combines four functions of low-frequency electric pulse, magnetic effect, far infrared heating, and circular traction to ensure the curative effect reaches the body’s deep tissues and marrow. - Page 3 Conducting / Heating Strip Working / Charging Indicator On/off Power Input Power Output Interface Interface Electric pulse indication Strength Indication Heat Indication Time Indication Mode Button On/off Up Button Down Button Heating Button...
- Page 4 How to Operate For Power Supply: For USB power supply, insert the output and input plugs of Micro USB Cable into the port (DC port) on the lower part of the massager and the AC power socket respectively. The built-in rechargeable battery can serve as the power supply when the external power supply is not used.
-
Page 5: Installation Diagram
Installation Diagram Mode 1: auto-combination mode 1 Mode 2: auto-combination mode 2 Mode 3: Scratch Shiatsu ( Massage Mode) Mode 4: Rolling ( Mode 5: Beating ( Scrating) Mode 6: The first two modes are manual, which will switch on automatically once every minute between each other. -
Page 6: Battery Charging
• Only the electrode pads provided for the massager (40 mm wide, 40 mm high, and 2.0 mm thick) are suitable for use. • Please dispose of the waste electrode pads according to your local environmental regulations. • It is recommended to use the massager once or twice a day; 15 minutes of electric impulse mode and 15 to 30 minutes of thermal moxibustion. -
Page 7: How To Remove The Rechargeable Battery
How to Remove the Rechargeable Battery: • The battery contains substances that may pollute the environment. Take it out before disposing of the product. • Turn off the power before disassembling the product. • Follow the steps as shown below. Disassemble the product in the order of ①-①... -
Page 8: Safety Precautions
Safety Precautions: Follow the safety precautions strictly for safe and correct use, and prevention of injury. WARNINGS • This massager should be used by pregnant women and those on menstrual periods • People with sensitive skin, abnormal blood pressure, heart disease, cerebral vascular disease, malignant tumor, or any acute disease should avoid its use •... -
Page 9: Technical Parameters And Specifications
• use it near your mouth, head, heart, private parts, or disease-infected areas. • Not suitable for patients with perceptual disability or insensitivity to heat • Avoid using while bathing, sleeping, or sweating • use at high temperatures, inflammable areas, or near electromagnetic radiations •... - Page 10 3. Electrical Performance Pulse frequency: 1Hz – 1000Hz; Pulse width: 20µs ~ 400µs; Pulse shape: square; Rated load impedance: 500①, with a tolerance of ±10%; Heating temperature: +38°C ~ +48°C (under a temperature of 25°C); Surface magnetic field intensity: not less than 0.01T; Timing time: 5-30 minutes, with a tolerance of ±10%;...
- Page 11 The contact between Rub a wet towel on the neck before The feeling of massager electrodes bringing the electrodes in contact with sharp pain and the neck the skin. Adjust the intensity accordingly. Appropriate massage time is 15-20 Massage duration minutes Lower the pressure if the intensity is High intensity...
-
Page 12: Frequently Asked Questions
Frequently Asked Questions Q: Why do I feel tingling in the neck after using the electric pulse function? A: You may feel tingling sensation if your skin is dry or the massager is not in close contact with the skin. Consider using a wet towel on your neck before use. - Page 13 ً ً...