NuWave PIC Flex Quick Start Manual

Precision induction cooktop

Hide thumbs Also See for PIC Flex:

PIC

Precision Induction Cooktop

Getting Started

Temperatures and times can be adjusted on all functions before and during the cooking process.

Start cooking. 375˚F for 1 hour are the defaults.

Press Start to begin cooking.

Note: Press Pause/Clear during cooking to pause the PIC. Press Start to resume. Press Pause/Clear twice to clear.

Changing Fahrenheit to Celsius.

Press Prog. Press (-) once to display Fahrenheit (F). Press (-) again to display Celsius (C). Press Pause/Clear to finish.

Adjust cooking temperature.

Increase or decrease the temperature manually by selecting one of the six temperature settings or by pressing (+) or (-) to adjust the

temperature by 10-degree increments.

Note: Refer to the owner's manual for details.

Adjust cooking Time.

Press Time twice. The number on the far right will flash. Use the (-) or (+) keys to adjust. Press Time for each number to be changed.

Note: The flashing digit is the number being altered.

Stage/Program cooking.

Program the PIC Flex to cook at different temperatures for different amounts of time. Ex: High for 5 min. then Low for 3 min.

Press Prog to set the stages. Press High, Time and then press (+) five times for 5 min. at High. Press Low, Time, and then press (+)

three times for 3 min. at Low. Press Start to begin cooking.

Note: You can add additional stages by repeating steps.

Quick Start Guide

PIC Flex

Part #: 30501

Table of Contents

Do you have a question about the PIC Flex and is the answer not in the manual?

Page 1 Stage/Program cooking. Program the PIC Flex to cook at different temperatures for different amounts of time. Ex: High for 5 min. then Low for 3 min. Press Prog to set the stages. Press High, Time and then press (+) five times for 5 min. at High. Press Low, Time, and then press (+) three times for 3 min.
Page 2 The heating surface is located inside the thicker silver ring. The minimum diameter of acceptable cookware is 3 inches. Always place cookware in the center of the heating circle. You may use pans measuring up to the total width of the PIC Flex, which measures 10 inches.
Page 3 Cooking Guide ® Precision Induction Cooktop Note: Temperatures and times may need minor adjustments to best suit your desired results. Prepackaged Foods: Follow the directions on the package and reduce temps and times by 15%. Check periodically. Beef/Lamb Temp Fresh - Minutes Frozen - Minutes Internal Temp.
Page 4 However, be cautioned that there are instances when a cooking vessel’s magnetic properties may not be strong enough for the pot to work efficiently with the PIC Flex. 2. Place a small amount of water in a pot or pan. If induction compatible, water will begin to boil.

30501