JBL Endurance Peak Manual
Also See for JBL Endurance Peak:

Advertisement

JBL Endurance Peak Manual

Endurance Peak

WHAT'S IN THE BOX

WHAT'S IN THE BOX

OVERVIEW

Touch control panel & LEDs

Touch control panel & LEDs Overview

* All touch controls are on the right earbud.

Charging

Fully charge the earbuds along with the charging case before the first use. Charging case is for charging the earbuds only.

  1. Charging the case
    Charging the case
  1. Charging the earbuds
    Charging the earbuds

WEARING THE HEADPHONE

  1. Select the ear tips
    WEARING - Select the ear tips.
  1. Attach the enhancers and ear tips onto the earbuds
    WEARING - Attach the enhancers and ear tips onto the earbuds.
  1. TWISTLOCK™ Technology
    Insert the earbuds downwards into your ear. Twist backwards to lock in place. Adjust for comfort.
    WEARING - TWISTLOCK™ Technology

POWERHOOK™: AUTOMATIC POWER ON/OFF

  1. Take out the right earbud from the charging case and unhook POWERHOOK™, it will power on and enter device pairing mode.
    POWERHOOK - Step 1 - take out the right earbud from the charging case
  1. Take out the left earbud from the charging case, it will power on and automatically connect with the right earbud.
    POWERHOOK - Step 2 - Take out the left earbud from the charging case
  1. Standby mode
    POWERHOOK - Step 3 - Standby mode
    * You can keep the earbuds in standby mode for upto 3hrs without having to return them to the case, beyond this period the earbuds must be returned to the case for charging.
  1. To completely power off the earbuds, return them back to the charging case.
    POWERHOOK - Step 4 - To completely power off the earbuds

BLUETOOTH PAIRING

  1. If connecting for the first time, the earbuds will enter Bluetooth pairing mode automatically after they are powered on.
    BLUETOOTH PAIRING - Step 1 - Connecting for the first time
  1. To pair with a new device, tap once, tap again and hold the touch control panel on the right earbud for 5 seconds.
    BLUETOOTH PAIRING - Step 2 - To pair with a new device

CONTROLLING MUSIC

CONTROLLING MUSIC

MANAGING PHONE CALLS

MANAGING PHONE CALLS

MONO MODE

Use the right earbud only and put the left earbud back into the charging case.
MONO MODE

FACTORY RESET

  1. Put left and right earbuds into charging case until the red LEDs on.
    FACTORY RESET - Step 1 - Put left and right earbuds into charging case
  1. Tap once on the right earbud touch panel and immediately tap again (<1s) and hold for 10 seconds until the red LED flash.
    FACTORY RESET - Step 2 - Tap once on the right earbud touch panel

WATERPROOF



*Do not put the earbuds in the charging case when the earbuds are wet.

LED BEHAVIOUR

LED BEHAVIOUR

On Power on/off (L/R)
Slow Low battery (L/R)
Solid Charging (L/R)
Off Full charging (L/R)
Fast TWS pairing (L/R) / Bluetooth pairing (R)
Solid TWS connected (L/R) / Bluetooth connected (R)

SPECIFICATIONS

  • Model: ENDURANCE PEAK
  • Bluetooth version: 4.2
  • Support: A2DP V1.3, AVRCP V1.5, HFP V1.6
  • Headset Battery type: Lithium-ion polymer (3.7V, 75mAh)
  • Bluetooth transmitter power < 10dBm
  • Bluetooth transmitter frequency range: 2.402 – 2.480GHz
  • Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
  • Dynamic drivers: 10mm
  • Frequency Response: 16 – 22 kHz
  • Charging case battery: 3.7V, 1,500mAh
  • Earbuds Battery life: Up to 4 hours
  • Charging time: < 2 hours
  • Compatibility: Use with Phones, Tablets, Computers

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Brand

Videos

JBL Endurance Peak - REVIEW VIDEO

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download JBL Endurance Peak Manual

Advertisement

Need help?

Need help?

Do you have a question about the JBL Endurance Peak and is the answer not in the manual?

Questions and answers

Table of Contents