Digital Led Display - NSI NCM 6200 Operation Manual

The two-character digital LED display is located on the center of the front panel of the console. This display
normally show the current memory page number when no special functions are active. The LED display will also
indicate the status of special operation modes as listed below.
DISPLAY
FL
Pr
CP
FP
CF
SS
Lo
on
oF
PH
di
SP
dU
SC
rC
BO
Ld

DIGITAL LED DISPLAY

MEANING
Flash mode is currently active.
Program mode. Select function to program.
Chase Program. Select chase to program.
Flash Program. Select flash scene to prog.
Configure mode. Select configuration no.
Scene Split. Select desired scene for split.
Program Lock. Press scene 1 to toggle.
Lock or softpatch currently on.
Lock or softpatch currently off.
Preheat. Select preheat level.
Maximum dimmers. Select maximum dimmer no.
Softpatch. Turn softpatch on or off.
Memory Dump. Save memory on MIDI device.
Send Channel. Set MIDI send channel.
Receive Channel. Set MIDI receive channel.
MIDI Blackout. Set MIDI Blackout command.
Loading MIDI memory dump. Please Standby.