NSI NCM 6200 Operation Manual page 17

COMMAND
NOTE ON
CONTROL
CHANGE
PROGRAM
CHANGE
MIDI CLOCK
SYSTEM
EXCLUSIVE
CONTROL NUMBER
1
2
60
64
70
123
MESSAGE
MIDI clock
MIDI COMMANDS RECEIVED
HEX CODE
1001nnnn
0kkkkkkk
0vvvvvvv
1011nnnn
0kkkkkkk
0vvvvv-vv
1100nnnn
0kkkkkkk
11111000
11110000
11110111
CONTROL CHANGES ACCEPTED
CONTROL VALUE
0 - 127 (OOH - 7FH)
0 - 127 (OOH - 7FH)
0 (OOH)
1 – 4 (01H - 04H)
0 (OOH)
0 (OOH)
1 (01H)
2 (02H)
0 (OOH) Reset console (if conf.)
REAL TIME MSGS ACCEPTED
ACTION
Syncronizes chase rate.
DATA
n = MIDI channel assignment 1-16 (0-15)
k = Lighting channel no. (32-47, 64-79)
v = Lighting channel intensity (0 - 127)
n = MIDI channel assignment 1-16 (0-15)
k = Control number (see below)
v = Control value (see below)
n = MIDI channel assignment 1-16 (0-15)
k = Program number (see below)
Real time msg
start of system exclusive
end of system exclusive
ACTION
Sets fade rate for proceeding light level changes
Sets relative chase rate 0 = stop, 127 = max
Deactivates chase.
Normal chase I – 4
Reset console (if conf.)
Direct Dimmer Access off
Direct Dimmer Access on ignore note off cmds
Direct Dimmer Access on note off cmds accepted