Power Requirements; Power Cable - Intellian i2 Installation Manual

Intellian Satellite TV Antenna Systems
Cables
Before installing the system's cables, consider the following points.
• All cables need to be well clamped and protected from physical
damage and exposure to heat and humidity.
• A cable with an acute bend is not allowed.
• Where a cable passes through an exposed bulkhead or deckhead, a
watertight gland or swan neck tube should be used.

Power Requirements

You need to follow the power requirements to avoid damaging the
system.
• Intellian i2 has been designed to work on a boat's power supply rated
at 12V / 24V DC (acceptable range: 9~30 V DC).
• If your IRD(s) and television(s) require a 110V/240V AC power supply,
you will need to install a suitable DC to AC converter to operate the
unit(s) from your boat's DC power supply.
12
Extending the cables
The cables that have been supplied with your Intellian system should be
of adequate length to complete the installation on most boats.

Power Cable

This cable is supplied at a length of 10m.
RF Cable
This cable is supplied at a length of 15m. If a longer length is required
you should replace this cable with an extended RF cable supplied by
Intellian Technologies.
Exceeding the indicated cable lengths will result in reduced
Note:
performance of your system.