Select Maximum Dimmers (cont.) :
Move all slide controls with their corresponding LEDs lit to the full maximum position to preserve the
state of the switches. (Slide controls with there LEDs on due to software must be moved to maximum to
preserve the state of the configuration.)
THEN
Move the slide controls for channels 15 and 16 to minimum or maximum (LEDs off or on) as desired to
activate the configuration changes as listed on page 30, and below.
MAXIMUM DIMMERS
16
32
48
64
Programming Softpatch
Step-By-Step
Procedures
(Continued)
CHANNEL LEVEL LEDs
Ch. 15 OFF, Ch. 16 OFF
Ch. 15 ON, Ch. 16 OFF
Ch. 15 OFF, Ch. 16 ON
Ch. 15 ON, Ch. 16 ON
33