STEP 3. ROOF PANEL ASSEMBLY
3.1 Lay out all the components
as shown below.
3.2 Overlap and fasten the four sheets together.
Move the U channels 'ClSOO' in position with the
ends butted together to form lengths of 3000mm,
then join the U channels together with the channel
joiners 'EICJ'. Fasten the channel joiners and the
U channels to the sheet in one operation as shown.
3.3 Position and fasten the two L flashings.
The L flashing fits between the U channel
and the outside face of the sheet.
MODEL: EF-D3008
EasyShed
-----__,
L970
SAFETY EDGE _J
®
Page 11