Product Features - Dell UltraSharp 34 User Manual

Product features

The Dell U3423WE monitor has an active matrix, Thin-Film Transistor (TFT),
Liquid Crystal Display (LCD) and LED backlight. The monitor features include:
• 86.72 cm (34.14 in.) viewable area (measured diagonally). 
3440 x 1440 (21:9) resolution, plus full-screen support for lower resolutions.
• Wide viewing angle to allow viewing from a sitting or standing position.
• Color gamut of DCI-P3 98%, Display P3 98%, sRGB 100%, and Rec 709 100%
with an average Delta E < 2.
• Digital connectivity with DisplayPort, USB Type-C and HDMI.
• Single USB Type-C to supply power (PD 90 W) to a compatible notebook
while receiving video & data signal.
• Tilt, swivel, height, and slant adjust capabilities.
• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling
easier setup with an elegant viewing experience.
• Removable stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Equipped with:
•1 USB Type-C upstream port (video and data; DP1.4 with Alternate mode, PD
up to 90 W)
•1 USB Type-C upstream port (data only)
•1 super speed USB 10 Gbps (USB 3.2 Gen2) Type-C downstream port
•1 super speed USB 10 Gbps (USB 3.2 Gen2) Type-A downstream charging
port
•4 super speed USB 10 Gbps (USB 3.2 Gen2) Type-A downstream ports
• USB-C and RJ45 ports enable a single-cable, network-connected experience.
• Plug and play capability if supported by your system.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports Picture by Picture (PBP) and Picture in Picture (PIP) Select mode.
• The built-in KVM switch allows you to control up to 2 computers from a single
set of keyboard and mouse connected to the monitor.
• Supports Auto KVM for multiple input setup.
• Power and OSD buttons lock.
• Security-lock slot.
• Stand lock.
• < 0.3 W in Standby Mode.
About your monitor
│
9