Table of Contents
Advertisement
3-6 DTV Program Download & Generals
3-6-1 Software Version Check Method
Press the MENU key and select System.
Where you can find the Prodect Information menu in it.
When you press the Product Information you can find the Software Version.
3-6-2 Serial Download Method
1) Turn off LCD-TV.
2) Connect the RS-232 cable to the LCD-TV
3) Execute the sv2_fr.exe file.
4) Assign the path of samsung.tvz file (application image)
5) Execute the progress follow the screen until step 2.
6) Turn On the LCD-TV.
7) If the LCD-TV turn on during the sv2_fr.exe execution, it will automatically find the COM port and
execute the upgrade.
3-6-3 Hyper Terminal Setting
Set the hyper terminal to observe the progress of the TV via the RS-232 cable.
Set up hyper terminal.
1) When setting up a hyper terminal, set it in sub-program.
2) Enter a new name.
3) Select a modem port. (com 1 and direct connection.)
4) Set the bit/second to 115200.
5) Set the data bit to 8.
6) No parity bit.
7) Set stop bit to 1.
8) No flow control.
9) Save in memory.
10) At this point, the new hyper terminal is ready.
3-6-4 Resetting the System Parameters
1) Press the MENU button and select the Reset menu of System.
2) Press the secret number.
3) Press the RED, GREEN, YELLOW, BLUE button in order, after the Reset execute.
4) In a few minutes, DTV will booting again.
3 Alignments and Adjustments
3-15
Free Datasheet http://www.Datasheet4U.com
Advertisement
Table of Contents
