Source
Component1/2
Get user manuals:
See SafeManuals.com
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (
While the headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Connector for engineer.
Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector ("P
other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the
DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
- The P
, P
and Y connectors on your component devices (DTV or DVD) are sometimes labeled R-Y , B-Y
R
B
and Y or Cr, Cb and Y.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding
audio out connectors on the DTV or DVD.
Video
PAL
SECAM
NTSC4.43
NTSC3.58
480/60i
480/60p
576/50i
576/50p
720/60p
1080/50i
1080/60i
English-6
) on the rear of your set.
","P
R
Horizontal Frequency
Vertical Frequency
(kHz)
15.625
15.625
15.734
15.704
15.734
31.469
15.625
31.250
45.000
28.125
33.750
","Y") on the rear of your set and the
B
","P
","Y") on your set.
R
B
Resolution
(Hz)
(Lines)
50
575
50
575
60
483
60
483
60
483
60
483
50
576
50
576
60
720
50
1080
60
1080