URBANGLIDE M2S User Manual page 14

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
You have 2 ways to load your bike :
Connect your charger directly to your bike.
The charger displays two indicator lights : Charge and
Power
Power tells you that the charger is connected to a
power source and can therefore be used.
Charge tells you the charge level of your battery.
In charge
Charge
WARNING! Disconnect the charger when the battery is charged. This will avoid shortening the life of
the battery.
WARNING! Failure to use the battery for an extended period of time may cause irreparable damage
to the battery. Make sure to recharge the battery every 3 months for half an hour.
WARNING! If you do not use the bike for a long period of time, we recommend removing the
battery.
WARNING! When the battery is completely empty, you must recharge it immediately. Cells that
Charger
remain empty for a long time can suffer irreparable damage.
Remove the battery and plug your charger into it.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Po2848

Table of Contents