Using The Screen; Display Mode; Front Light - URBANGLIDE M2S User Manual

Trip: This mode allows you to see the number of kilometres travelled on a trip.
ODO: Allows you to see the total mileage of the bike.
Max: Allows you to see the maximum speed you have reached with your bike.
AVG: The average speed during your ride.
Ridtime: Allows you to see the duration of your trip.
START ASSIST MODE
By pressing and holding the "-" button on your screen, you activate the starting assistance, your bike will move
forward by itself up to 6km/h.

FRONT LIGHT

To turn on the front light of your product, press the "+" button on your screen for 2 seconds. Do the same to turn it
off.
LEVEL OF ASSISTANCE
You can vary the level of assistance by pressing the "+" and "-" buttons on your screen. The higher the level of
assistance, the more the motor will push you and assist you.

USING THE SCREEN

To turn on your product,
press and hold the "mode"
button for 2 seconds. To turn it off, press this button again for 2 seconds.
Your bike will automatically go to sleep after 10 minutes.

DISPLAY MODE

When you switch on your bike, it automatically displays the live speed. You
can change the display mode by pressing the "mode" button once. You have
different display modes such as :
12
1 Speed
2 Battery level
3 Power
4 Level of assistance
5 Speed unit
1 Lowering the level of assistance
2 Mode
3 Increasing the speed level