Table of Contents
Advertisement
22
13
APPENDIX A
13 .1 Maintenance
It is advisable to check the general condition of the installation from time to time to
make sure no deterioration has occurred, and that no unauthorized modifications have
been made. The following should be checked at intervals of not more than two years,
and more frequently for systems used in particularly harsh environments.
Check that ......
a. units are of the types specified in the relevant documentation.
b. unit labelling and tagging is clearly legible, and the details given comply with the
relevant documentation.
c. units and enclosures are securely mounted.
d. there are no signs of damage or corrosion affecting the installation.
e. interconnecting cables are of the specified type and ratings, correctly routed
and segregated, and not frayed or otherwise damaged.
f.
all connections are properly made.
g. the locations in which the units are mounted have not been degraded by the
introduction of harmful materials.
h. access lids and doors to protective enclosures and cabinets are
correctly secured.
13 .2 Disposal
Product - End of Life
Eaton's MTL product line sells products world-wide that must meet the environmental
and regulatory requirements of different countries and regions.
European directives on Waste Electronic and Electronic Equipment (WEEE) define
the requirements on a producer to provide for the end-of-life recovery and recycling
of electronic products when they become waste at the end of their life.
Eaton's MTL831C is marked with the 'crossed out wheelie-bin"
symbol which indicates that the item is electronic or electronic
equipment, and must be disposed of in the appropriate manner.
Other countries and regions may have their own environmental
regulatory requirements regarding recovery and recycling of electronic
products at the end of their life.
For more detailed information about take-back and equipment recycling please contact
your local Eaton MTL representative.
INM MTL831C Rev 7
Advertisement
Table of Contents
