HP Pavilion FX75 User Manual page 11

All manuals and user guides at all-guides.com
3
Plug the two-prong power cord into a power
outlet, and plug the other end into the A/C
power adapter.
4
Plug the analog video signal cable into the
Analog Video Input port on the back of the
display. (The port's label is colored blue to match
the blue mark on the cable plug.)
Note:
The display also offers a DVI Digital Video
Input port. If your PC has a DVI digital output
port, you can connect to it by plugging a digital
video signal cable (purchased separately) into
the Digital Video Input port on the display.
5
Connect the other end of the video cable into
your computer video port. If you have an HP
Pavilion PC, the video cable plug is color-coded
to match the port label on the PC. (For other PCs,
check the computer documentation if you're not
sure where the port is located.)
Filename: fx75UGrw.doc Title: Book Title
Template: HP-Print.dot Author: WASSER, Inc.
Revision #: 30 Page: 7 of 43 Printed: 10/16/00 03:31 PM
6
Thread the cables through the cable claw at the
base of the display.
Cable claw
Last Saved By: WASSER, Inc.
7
Installation